Page tree
Skip to end of metadata
Go to start of metadata

Overview

Equipment Details


Average Installation Time


On This Page

Make: Whirlpool
TEST F1 Reader Installation Guides


TODO


Known Models

CAM2752RQ0
CAM2752TQ
CAM2752TQ2
CAM2752TQ3
CAM2762RQ0
CAM2762TQ
CAM2762TQ0
CAM2762TQ03
CAM2762TQ2
CAM2762TQ3
TEST F1 Reader Installation Guides



This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

Part IDDescriptionImage
C-5001
F1 FasCard Reader

Recommended Tools and Supplies (Not Included)

See 0435 FasCard F1 Install Guide for more information.

Installation

    Page not found for multiexcerpt macro.
The page: null was not found. Please check/update the page name used in the 'multiexcerpt-include' macro.

Install Mounting Hardware

Card Only

P/N: C-0141
Screw
8-32 x 1-1/2" - Cap
Qty: 2
P/N: C-0301
Topload Mounting Bolt
Qty: 1
P/N: C-5027
Label
Credit Card Logo
Qty: 1
P/N: C-5771
Metercase Bracket
Coin Drop Ready Machines
Qty: 1

  1. Remove existing coin box and coin slide.

  2. Install the C-5771 Metercase Bracket over the front of the metercase. 

  3. Secure in place using the C-0301 Topload Mounting Bolt.

Connect Power

P/N: C-5101
Spade Taps
18-14 AWG
Qty: 3
P/N: C-5210
Power Adapter Harness
CGI
Qty: 1
P/N: C-5602R1
Power Converter
SMT-012-018VW
Qty: 1

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
  2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
  3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Connect Machine Interface Harness

Pulse

P/N: C-0116-MEC
Machine Start Harness
Mechanical Harness
Qty: 1

  1. Connect the C-0116-MEC Machine Start Harness 6-pin connector at the Coin Box area.
    1. Connect the 2-pin connector of the harness under the faceplate, near display/controls.

Connect and Mount Reader

    Page not found for multiexcerpt macro.
The page: null was not found. Please check/update the page name used in the 'multiexcerpt-include' macro.

  1. Feed remaining harness ends through the mounting hole as described in the F1: FasCard Reader Mounting Guide.
  2. Connect the free end of the C-0116-MEC Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the C-5500 Power Extension Harness to port 4 (Power Harness Connection Port) as shown in the image above.
  4. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

Machine Configuration

TODO

FasCard Admin Site Configuration

Use the following settings depending on the Machine Start Harness used.

Pulse (C-0116-MEC)

  1. Equipment Type: SingleVend
  2. Pulse Length: 40000

    Page not found for multiexcerpt macro.
The page: null was not found. Please check/update the page name used in the 'multiexcerpt-include' macro.