Page tree
Skip to end of metadata
Go to start of metadata

Overview

Equipment Details


Average Installation Time


On This Page

Make: [VARIES]
Alliance Centurion Washer-Extractor
TEST F2 Reader Installation Guides


TODO


Known Models

HCN020HCFXU3001
HCN020KCFBU3001
HCN020KCFXC3002
HCN020KCFXU2001
HCN020KCFXU3001
HCN020KCVBU3001
HCN020KCVX13001
HCN020KCVXC3001
HCN020KCVXU3001
HCN020KDFXC3001
HCN020KDVXU2001
HCN020KXFXU3001
HCN020KYVX03001
HCN020KYVX13001
HCN030HCFXU3001
HCN030KCFXC3001
HCN030KCFXC3002
HCN030KCFXU1001
HCN030KCFXU2001
HCN030KCFXU3001
HCN030KCFXU3002
HCN030KCVXC3001
HCN030KCVXU1001
HCN030KCVXU2001
HCN030KCVXU3001
HCN030KDFXC2001
HCN030KDVXC3001
HCN030KDVXU2001
HCN030KXFXU3002
HCN030KYVX03001
HCN030KYVX03C01
HCN030KYVXC3001
HCN040GC2OU1JU1
HCN040HC2001001
HCN040HC2BU1001
HCN040HCFXU2001
HCN040HNFXU2001
HCN040KCFX02001
HCN040KCFXB2002
HCN040KCFXC2001
HCN040KCFXC2002
HCN040KCFXU2001
HCN040KCVX12001
HCN040KCVXC2001
HCN040KCVXU1001
HCN040KCVXU2000
HCN040KCVXU2001
HCN040KCVXU2003
HCN040KCVXU3001
HCN040KDFXC2001
HCN040KDFXC3001
HCN040KDVXU2001
HCN040KEFXC2001
HCN040KXFXU2002
HCN040KYVX12001
HCN040KYVXC2002
HCN060HCFXU2001
HCN060KCFX02021
HCN060KCFXC2001
HCN060KCFXC2002
HCN060KCFXU1001
HCN060KCFXU2001
HCN060KCFXU2003
HCN060KCVX12001
HCN060KCVXB2001
HCN060KCVXC2001
HCN060KCVXC2002
HCN060KCVXU1001
HCN060KCVXU2001
HCN060KCVXU2006
HCN060KDVXU2001
HCN060KEFXC2001
HCN060KXFXU2002
HCN060KYVX12001
HCN080HCFX12001
HCN080KCFX12001
HCN080KCFX12002
HCN080KCFXB2002
HCN080KCFXU2001
HCN080KCFXU2002
HCN080KCVX11001
HCN080KCVX12001
HCN080KCVXB2001
HCN080KCVXB2003
HCN080KCVXU2001
HCN080KDVXB2001
HCN080KDVXB2002
HCN080KDVXU2001
HCN080KEFXB2001
HCN100KCVX12001
ICN020KCFBU3001
ICN030KCFXU3001
ICN030KCFXU3002
ICN040KCFXU2001
ICN060KCFXU2001
SCN020JCFBU3001
SCN020JCFXU2001
SCN020JYFXU2001
SCN020JYFXU3001
SCN020LCFBU3001
SCN020LCFXU2001
SCN020LCFXU3001
SCN020LCVXU2001
SCN020LXFXU3001
SCN020LYFXU2001
SCN020WCFBU3001
SCN020WCVXU2001
SCN020WD2OU1001
SCN030GC20U1001
SCN030JC20U1001
SCN030JC2OU1001
SCN030JC2YU1001
SCN030JCFXU3001
SCN030JY20U1001
SCN030JYFXU3001
SCN030LCFXU2001
SCN030LCFXU3001
SCN030LCVXU1001
SCN030LCVXU2001
SCN030LCVXU3001
SCN030LXFXU3001
SCN030LY2YU1001
SCN030LYFXU2001
SCN030WCVXU3002
SCN040GC20U1001
SCN040JC2OU1001
SCN040JC2YU1001
SCN040JCF000000
SCN040JCFXU2001
SCN040JY2001001
SCN040LC2YU0001
SCN040LCFBU2001
SCN040LCFXC2001
SCN040LCFXU2001
SCN040LCVXU2000
SCN040LCVXU2001
SCN040LYFXU2001
SCN040WC2OU0001
SCN040WCFXU2002
SCN040WCVXU2002
SCN040WY20U0001
SCN060GC20U1001
SCN060GC2OU1001
SCN060JCFX11001
SCN060JCFXU2001
SCN060JY20U1001
SCN060LC2001001
SCN060LC2OU1001
SCN060LCFXC2001
SCN060LCFXU2001
SCN060LCVXC2001
SCN060LCVXU0000
SCN060LCVXU0001
SCN060LCVXU2001
SCN060WCFXU2002
SCN080JCFX12001
SCN080JYFX11001
SCN080LCFX12001
SCN080LCFXU1001
SCN080LCFXU2001
SCN080LCVX00000
SCN080LCVX11001
SCN080LCVX12001
SCN080LYFXB2001
SCN080WCFX12002
SCN080WYVX10001
SCN080WYVX11001
SCN100LCVX12001
SCN100WCVX12001
TEST F2 Reader Installation Guides

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

One of the following readers.

Part IDDescriptionImage
C-3001
LC WiFi Reader
Front/Vertical Mount
C-3002
LC WiFi Reader
Top/Horizontal Mount
C-5401
F2 FasCard Reader
Front Mount
C-5402
F2 FasCard Reader
High Front/Top Mount
C-5403
FLEX Reader
Front/Vertical Mount
C-5404
FLEX Reader
Top/Horizontal Mount

Recommended Tools and Supplies (Not Included)

See 3573 F2 Reader Install Guide for more information.

Installation

    Page not found for multiexcerpt macro.
The page: null was not found. Please check/update the page name used in the 'multiexcerpt-include' macro.

Install Mounting Hardware

Coin and Card

P/N: C-6801
F2 Reader Mounting Kit
Universal
Qty: 1

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions.

Card Only - Coin Ready

P/N: C-0144
Screw
8-32 x 2" - Flat
Qty: 2
P/N: C-5365
Bypass Harness
Alliance Coin Vault Bypass
Qty: 1
P/N: C-6801
F2 Reader Mounting Kit
Universal
Qty: 1
P/N: C-6936
F2, Sm Vault Mount Bracket
Qty: 1

  1. Remove existing coin box.

  2. Install the C-5365 Bypass Harness by removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.
  3. Bend the side tabs of the C-6936 Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  4. Attach the C-5414 F2 Mounting Bracket to the Coin Vault Bracket using C-0144 screws.

Card Only - Card Ready

P/N: C-1060
Screw - Build: TK
8-32 x 3/8" - Zinc
Qty: 2
P/N: C-5414
F2 Standard Mounting Bracket
Sheet metal base
Qty: 1
P/N: C-5416
Screw
8-32" x 3/8" - Button - Torx
Qty: 2
P/N: C-5710
Rubber Grommet
3/4"
Qty: 1
P/N: C-6970
F2, Bracket
Alliance Card Ready
Qty: 1

  1. Install the C-6970 Alliance Mounting Bracket into the opening on the control panel for mounting card readers and coin drops.
  2. Attach the C-5414 F2 Mounting Bracket to the C-6970 Alliance Mounting Bracket and secure using the C-1060 Screws.
  3. Refer to F2 FasCard Reader Mounting Guide for further instructions.

Connect Power

P/N: C-5101
Spade Taps
18-14 AWG
Qty: 3
P/N: C-5210
Power Adapter Harness
CGI
Qty: 1
P/N: C-5500
Power Extension Harness
25.5"
Qty: 1
P/N: C-5602R1
Power Converter
SMT-012-018VW
Qty: 1

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
  2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
  3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Coin Drop: Factory

P/N: C-6250
Coin Sense Harness
can use C-6250-144
Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.

Coin Drop: Dual Coin

P/N: C-6250
Coin Sense Harness
can use C-6250-144
Qty: 2

  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the first C-6250 Coin Sense Harness to the coin drop harness connected to the Coin 1 connector on the Machine Control Assembly.
  3. Connect the second C-6250 Coin Sense Harness to the coin drop harness connected to the Coin 2 connector on the Machine Control Assembly.

Connect Machine Interface Harness

Pulse

P/N: C-5300-NC
Machine Start Harness
can use C-5300-NC-144
Qty: 1

  1. Connect the C-5300-NC Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

Serial

P/N: C-0110-CP
Jumper Plug
Enables card mode on pre-ACA
Qty: 1
P/N: C-0110-TOP
Machine Start Harness
can use C-0110-TOP-144
Qty: 1

  1. Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
  2. Connect the C-0110-CP Jumper Plug to the H6 connection on the Machine Control Assembly.

Connect and Mount Reader

Item No.ComponentNotes
1Power Connection PortUtilizes the same power harnesses as the first generation FasCard reader.
2Pulse Connection PortConnection point for pulse machine start harnesses.
3Coin 1 Connection PortThis is the connection point for the harness input associated with Coin 1.
4Coin 2 Connection PortThis is the connection point for the harness input associated with Coin 2.
5Serial Connection PortThis is the connection point for serial machine start harnesses.

  1. Feed remaining harness ends through the mounting hole as described in the F1: FasCard Reader Mounting Guide.
  2. Connect the free end of the Machine Start Harness:
    1. If following steps for a serial Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
    2. If following steps for a pulse Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the C-6250 Coin Sense Harness connected to the Coin 1 harness to port 3 (Coin 1 Sense Harness Connection Port) as shown in the image above.
    1. Dual coin setups, connect the free end of the C-6250 Coin Sense Harness connected to the Coin 2 harness to port 4 (Coin 2 Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5500 Power Extension Harness to port 1 (C-5500 Power Harness Connection Port) as shown in the image above.
  5. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

Machine Configuration

TODO

FasCard Admin Site Configuration

Use the following settings depending on the Machine Start Harness used.

Pulse (C-5300-NC)

  1. Equipment Type: SingleVend
  2. Pulse Length: 80

Serial (C-0110-TOP)

  1. Equipment Type: