Page tree
Skip to end of metadata
Go to start of metadata

Overview

Equipment Details


Average Installation Time


On This Page

Make: [VARIES]
NetMaster Controls use in K and S Models through serial numbers (K) 1101018349 and (S) 0904004427.
TEST F1 Reader Installation Guides


TODO


Known Models

CTT45NBCG2G2Q01
HTT30EKC1111N11
HTT30LBCB2G1Q03
HTT30LBCB2G2Q01
HTT30LBCB2G2W00
HTT30N3VANBG3N0
HTT30N3XANBG3N0
HTT30NBC B2S2N01
HTT30NBC2S1TN01
HTT30NBC82S1N01
HTT30NBCANBG3N0
HTT30NBCB202W01
HTT30NBCB251N01
HTT30NBCB2B2N01
HTT30NBCB2G1N01
HTT30NBCB2G1W01
HTT30NBCB2G2N00
HTT30NBCB2G2N01
HTT30NBCB2G2N02
HTT30NBCB2G2N0X
HTT30NBCB2G2N19
HTT30NBCB2G2NO2
HTT30NBCB2G2NOX
HTT30NBCB2G2Q01
HTT30NBCB2G2W00
HTT30NBCB2G2W01
HTT30NBCB2G2W0X
HTT30NBCB2S1N00
HTT30NBCB2S1N01
HTT30NBCB2S1Q01
HTT30NBCB2S2N01
HTT30NBCBZ51N01
HTT30NBCF6G2N03
HTT30NBCNXG3W00
HTT30NBGANBG3N0
HTT30NBYB252N01
HTT30NBYB2G2N00
HTT30NBYB2G2N01
HTT30NBYB2G2N03
HTT30NBYB2G2W02
HTT30NBYB2S1W01
HTT30NBYB2S2N00
HTT30NBYB2S2N01
HTT30NBYB2S2N0X
HTT30NBYBS2SN01
HTT30NECB2G1W01
HTT30NKCB2B2N08
HTT30NKCB2G2N02
HTT30NKCB2G2N06
HTT30NKCB2G2N08
HTT30NKCB2S2N02
HTT30NKCB2S2N03
HTT30NKYB2G2N03
HTT30NLCB2G2N02
HTT30NNJANBG3N0
HTT30NZCANBG3N0
HTT45LBCG2G2Q01
HTT45LBCG2G2W00
HTT45LBCG2G2W01
HTT45N3VG2G2W02
HTT45NBCANBG3N0
HTT45NBCB2B2N01
HTT45NBCB2G2N00
HTT45NBCB2G2N19
HTT45NBCB2G2W01
HTT45NBCF6G2N02
HTT45NBCG2G2N00
HTT45NBCG2G2N02
HTT45NBCG2G2N19
HTT45NBCG2G2Q01
HTT45NBCG2G2W00
HTT45NBCG2G2W01
HTT45NBCG2G2W03
HTT45NBCG2G2W13
HTT45NBCG2S2N02
HTT45NBXG2G2N01
HTT45NBYB2G2N00
HTT45NBYB2G2N01
HTT45NBYB2G2N02
HTT45NBYG2G2N01
HTT45NBYG2G2N02
HTT45NBYG2G2N03
HTT45NBYG2G2N0X
HTT45NBYG2G2W01
HTT45NBYG2S2N01
HTT45NBYG2S2N02
HTT45NKCB2G2N06
HTT45NKCG2G0N02
HTT45NKCG2G2N03
HTT45NKCG2G2N07
HTT45NKCG2G2N08
HTT45NKCG2G2N09
HTT45NKCG2G2W01
HTT45NKCG2S2N02
HTT45NKCG2SDN01
HTT45NKCG2SDNO1
HTT45NKYB2G2N02
HTT45NKYG2G2N02
HTT45NKYG2G2N03
HTT45NWY0NXG3NC
HTT45RKCG2S2N01
ITT30N3VB2G2W01
ITT45N3VE2G2N08
ITT45N3VG2G2N01
ITT45N3VG2G2N08
ITT45N3VG2G2NO1
ITT45N3VG2G2W02
ITT45NBCG2G2N01
ITT45NBCG2G2NO1
ITT45NBGG2G2N01
KTT30LBCANBH3N0
KTT30LBCB2H2N00
KTT30LBCB2H2N02
KTT30NBCB1H2N01
KTT30NBCB282N01
KTT30NBCB2H2N00
KTT30NBCB2H2N01
KTT30NBCB2H2W01
KTT30NBCB2H2W03
KTT30NBCB2S2N00
KTT30NBCB2S2N01
KTT30NBCG2H2N00
KTT30NBCG2H2N01
KTT30NBTB2H2N01
KTT30NBY0NXH3N0
KTT30NBYB2G2N01
KTT30NBYB2H2N00
KTT30NBYB2H2N01
KTT30NNCB2H2N01
KTT30NNY0NNH3N0
KTT30NNY0NNH3N1
KTT30NNY0NXH3N0
KTT30NNYB2S2W01
KTT45LBCG2H2N00
KTT45LBCG2H2N01
KTT45NBCANXH300
KTT45NBCANXH3N0
KTT45NBCB2H2N01
KTT45NBCG2A2N01
KTT45NBCG2G2W01
KTT45NBCG2H2N00
KTT45NBCG2H2N01
KTT45NBCG2H2W01
KTT45NBCG2S2N00
KTT45NBCG2S2N01
KTT45NBCV2H2N01
KTT45NBYB2H2N01
KTT45NBYG2H2N01
KTT45NBYG2H2NO1
KTT45NBYG2H2W01
KTT45NNY0NXH3N0
PTT45NBCG2G2N02
STT 30NBCB2G2N02
STT30LBCB2G2W01
STT30LBYB2G2W01
STT30LWCB2G2N01
STT30NBCANBG3N0
STT30NBCANXG300
STT30NBCB262N02
STT30NBCB2G1Q01
STT30NBCB2G1W01
STT30NBCB2G2N01
STT30NBCB2G2N02
STT30NBCB2G2Q01
STT30NBCB2G2W01
STT30NBCB2S1N01
STT30NBCD2G1N01
STT30NBCD2G2NO2
STT30NBCD2G2W01
STT30NBCG2G2W01
STT30NBCN2G2N02
STT30NBCN2G2W01
STT30NBXB261Q02
STT30NBXB2G1N02
STT30NBXB2G1Q02
STT30NBYB2G2N01
STT30NBYB2G2W02
STT30NBYB2S2N01
STT30NBYF6G2N01
STT30NLCB2G2N02
STT30NLCB2G2W01
STT30NLCB2S2N01
STT30NLCB2S2N02
STT30NLXB2G2W01
STT30NLYB2S2N01
STT30NLYF6G2W01
STT30NNCANBG3W0
STT30NNCANXG3N1
STT30NNCB2G1Q04
STT30NNCB2G1W04
STT30NNCB2G2N02
STT30NWCB2G1N00
STT30NWCB2G1N01
STT30NWCB2G2N02
STT30NWCB2G2N04
STT30NWYB2G2N02
STT30NZCB2G2N03
STT40NBCB2G2N01
STT45LBYB2G2W01
STT45LBYG2G2W01
STT45LWCG2G2N01
STT45NBCB2G2N00
STT45NBCB2G2N03
STT45NBCB2G2W01
STT45NBCG262N03
STT45NBCG2G2N01
STT45NBCG2G2N02
STT45NBCG2G2N03
STT45NBCG2G2Q01
STT45NBCG2G2W01
STT45NBCG2S2N01
STT45NBCGQG2N03
STT45NBYB2G2N00
STT45NBYE2G2N02
STT45NBYG2G2N01
STT45NBYG2G2N02
STT45NBYG2G2W01
STT45NBYG2S2N01
STT45NLCG2G2N00
STT45NLCG2G2N02
STT45NLCG2G2N03
STT45NLCG2G2Q02
STT45NLCG2G2W00
STT45NLCG2G2W01
STT45NLCG2S2N01
STT45NLCG2S2NXX
STT45NLXG2G2N01
STT45NLYG2S2N01
STT45NNCANXG30W
STT45NNCANXG3N1
STT45NNCANXG3W0
STT45NNCG2G2W01
STT45NWCG222N01
STT45NWCG2G2N02
STT45NWCG2G2N04
STT45NWCG2G2W01
STT45NWTG2G2N02
STT45NWYF6G2N01
STT45NWYG2G2N02
TEST F1 Reader Installation Guides



This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

Part IDDescriptionImage
C-5001
F1 FasCard Reader

Recommended Tools and Supplies (Not Included)

See 3578 F1 Reader Install Guide for more information.

Installation

    Page not found for multiexcerpt macro.
The page: null was not found. Please check/update the page name used in the 'multiexcerpt-include' macro.

Install Mounting Hardware

Coin and Card

P/N: C-5801
F1 Reader Mounting Kit
Front
Qty: 1

  1. Place the C-5700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions.

Card Only - Coin Ready

P/N: C-0133
Standoff
8-32" x 1-1/2" - Hex
Qty: 2
P/N: C-0144
Screw
8-32 x 2" - Flat
Qty: 2
P/N: C-0936
Vault Mount Bracket
Qty: 1
P/N: C-5027
Label
Credit Card Logo
Qty: 1
P/N: C-5033
Label
4-5/8" x 3-1/2"
Qty: 1
P/N: C-5365
Bypass Harness
Alliance Coin Vault Bypass
Qty: 1

  1. Remove existing coin box and coin drop.

  2. Remove wires connected to the coin vault service switch and connect together using C-5365 Bypass Harness.
  3. Bend the side tabs of the C-0936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket.

  4. Attach the C-0133 Standoffs to the Bracket.

  5. Attach the reader to the C-0936 Vault Bracket using C-0144 Screws.
  6. Apply C-5033 Label over the coin drop opening.
  7. Optional: Apply C-5027 Label for any applicable credit cards accepted on or near the reader.

Card Only - Card Ready

P/N: C-0970
Mounting Bracket
Multi-Purpose
Qty: 1
P/N: C-5027
Label
Credit Card Logo
Qty: 1
P/N: C-5751
Screw
8-32 x 2-1/2" - Flat
Qty: 2

  1. Remove existing reader bracket.

  2. Install the C-0970 Mounting Bracket in the payment device opening and secure using existing hardware.

  3. Attach the reader, using C-5751 Screws, to the C-0970 Mounting Bracket.

  4. Optional: Apply C-5027 Label for any applicable credit cards accepted on or near the reader.

Connect Power

P/N: C-5101
Spade Taps
18-14 AWG
Qty: 3
P/N: C-5210
Power Adapter Harness
CGI
Qty: 1
P/N: C-5500-84
Power Extension Harness
84"
Qty: 1
P/N: C-5602R1
Power Converter
SMT-012-018VW
Qty: 1

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
  2. Connect the opposite end of the C-5210  Power Adapter Harness to the C-5602 Power Converter.
  3. Connect the C-5500-84 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Coin Drop: Factory

P/N: C-5250
Coin Sense Harness
Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-5250 Coin Sense Harness to the harness connected to the Coin Drop.

Coin Drop: Imonex

P/N: C-5382
Coin Sense Harness
Imonex EM100/EM3
Qty: 1

  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-5382 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Pulse

P/N: C-5300-NC
Machine Start Harness
can use C-5300-NC-144
Qty: 1

  1. Connect the C-5300-NC Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

Serial

P/N: C-0110-CP
Jumper Plug
Enables card mode on pre-ACA
Qty: 1
P/N: C-0110-TOP
Machine Start Harness
can use C-0110-TOP-144
Qty: 1

  1. Connect the C-0110-TOP Machine Start Harness to the H4 connector on the Machine Control Assembly.

Connect and Mount Reader

    Page not found for multiexcerpt macro.
The page: null was not found. Please check/update the page name used in the 'multiexcerpt-include' macro.

  1. Feed remaining harness ends through the mounting hole as described in F1: FasCard Reader Mounting Guide.
  2. Connect the free end of the Machine Start Harness to the appropriate port.
    1. For C-5300-NC pulse start harnesses (white connector), connect to port 2 (Pulse Connection Port) as shown in the image above.
    2. For C-0110-TOP serial start harnesses (black connector), connect to port 1 (Serial Connection Port) as shown in the image above
  3. Connect the free end of the C-6250 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5500-84 Power Extension Harness to port 4 (C-5500 Power Harness Connection Port) as shown in the image above.
  5. Secure the FasCard reader to base as described in the F1: FasCard Reader Mounting Guide.

Machine Configuration

TODO

FasCard Admin Site Configuration

Use the following settings depending on the Machine Start Harness used.

Pulse (C-5300-NC)

  1. Equipment Type: SingleVend
  2. Pulse Length: 80

Serial (C-0110-TOP)

  1. Equipment Type: 

    Page not found for multiexcerpt macro.
The page: null was not found. Please check/update the page name used in the 'multiexcerpt-include' macro.