Page tree
Skip to end of metadata
Go to start of metadata

On this Page

Overview and Equipment Information

This document is intended to guide the user through installation utilizing the kit numbered according to the document title. A list of associated equipment models including control information and additional installation notes can be found below.

Kit Installation Notes

Status: Active

Product: FasCard F2
Manufacturer: Laundrylux
Start Harness: Dual Harness
Interface Type: Serial
Install Type: Coin and Card
Actuation: Coin Drop - Factory
Coin Sense: N/A
Mounting: Surface Mount
Chassis: N/A
Readers: 1 Reader
Machine Control: Laundrylux Compass


This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses. It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Required Hardware

Card Reader

One of the following readers.

Part IDDescriptionImage
C-3001
LC WiFi Reader
Front/Vertical Mount
C-3002
LC WiFi Reader
Top/Horizontal Mount
C-5401
F2 FasCard Reader
Front Mount
C-5402
F2 FasCard Reader
High Front/Top Mount
C-5403
FLEX Reader
Front/Vertical Mount
C-5404
FLEX Reader
Top/Horizontal Mount

Installation Kit

QTYPart NumberDescriptionImage
1C-0126-MLVMachine Start Harness (SA)
3C-5101Spade Taps
1C-5210Power Adapter Harness
1C-5359Machine Start Harness (SA)
1C-5500Power Extension Harness
1C-5602Power Converter
1C-6357Coin Sense Harness (SA)
1C-6801F2 Reader Mounting Kit

Recommended Tools and Supplies (Not Included)

See F2 Reader Mounting Guide for more information.

Installation

Confirm machine power is disconnected before beginning installation!

Use caution and appropriate protection to prevent hand and eye injury during installation!

Step 1 - Install Mounting Bracket

C-6700-TEMPC-6801
Drill Template
F2 Reader Mounting Kit

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.
  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.
  3. Refer to F2 Reader Mounting Guide for further instructions.

Step 2 - Connect Power

C-5101C-5210C-5500C-5602
Spade Taps
Power Adapter Harness
Power Extension Harness
Power Converter

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
  2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
  3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Step 3 - Connect Coin Sense Harness

C-6357
Coin Sense Harness (SA)

  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

Step 4 - Connect Machine Start Harness

C-0126-MLVC-5359
Machine Start Harness (SA)
Machine Start Harness (SA)

  1. Connect the C-0126-MLV Machine Start Harness to the Machine Control Assembly RS-232 port.
  2. Connect the C-5359 Machine Start Harness to the Machine Control Assembly Input 1 port.

Step 5 - Connect and Mount FasCard Reader

C-0126-MLVC-5359C-5401C-5500C-6357
Machine Start Harness (SA)
Machine Start Harness (SA)
F2 FasCard Reader
Power Extension Harness
Coin Sense Harness (SA)

  1. Feed remaining harness ends through mounting hole as described in F2 Reader Mounting Guide.
  2. Connect the free end of the C-0126-MLV Machine Start Harness to port 5 (Serial Connection Port) as shown in the image below.
  3. Connect the free end of the C-5359 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image below.
  4. Connect the free end of the C-6357 Coin Sense Harness to port 3 (Coin 1 Connection Port) as shown in the image below.
  5. Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Connection Port) as shown in the image below.
  6. Connect FasCard reader to base as described in the F2 Reader Mounting Guide.
  7. Program the card reader address as described here: How to Program Address on a FasCard Reader.

Item No.ComponentNotes
1Power Connection PortUtilizes the same power harnesses as the first generation FasCard reader.
2Pulse Connection PortConnection point for pulse machine start harnesses.
3Coin 1 Connection PortThis is the connection point for the harness input associated with Coin 1.
4Coin 2 Connection PortThis is the connection point for the harness input associated with Coin 2.
5Serial Connection PortThis is the connection point for serial machine start harnesses.

Associated Equipment Models

MakeModelControlNotes
ElectroluxW5105HLaundrylux Compass Pro Washer
ElectroluxW5130HLaundrylux Compass Pro Washer
ElectroluxW5130NLaundrylux Compass Pro Washer
ElectroluxW5130SLaundrylux Compass Pro Washer
ElectroluxW5180SLaundrylux Compass Pro Washer
ElectroluxW5240HLaundrylux Compass Pro Washer
ElectroluxW5250#Laundrylux Compass Pro Washer
ElectroluxW5280XLaundrylux Compass Pro Washer
ElectroluxW5300HLaundrylux Compass Pro Washer
ElectroluxW5330NLaundrylux Compass Pro Washer
ElectroluxW5330SLaundrylux Compass Pro Washer
ElectroluxW5350XLaundrylux Compass Pro Washer
ElectroluxW5600XLaundrylux Compass Pro Washer
ElectroluxW575HLaundrylux Compass Pro Washer
ElectroluxW585SLaundrylux Compass Pro Washer
WascomatSU620CCLaundrylux Compass Washer
WascomatSU630CCLaundrylux Compass Washer
WascomatSU640CCLaundrylux Compass Washer
WascomatW6##CCLaundrylux Compass Washer
WascomatW6##CCLaundrylux Compass Washer
WascomatW720CCLaundrylux Compass Pro Washer
WascomatW730CCLaundrylux Compass Pro Washer
WascomatW745CC*Laundrylux Compass Pro Washer
WascomatW762CCLaundrylux Compass Pro Washer
WascomatW777Laundrylux Compass Pro Washer
WascomatWLD7##*Laundrylux Compass Pro Washer