Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Div
Classtoc-header
Section
Column
width30
Panel
titleOn this Page

Table of Contents
maxLevel2
minLevel2

Column
width70
Panel
titleOverview and Equipment Information

Multiexcerpt include
MultiExcerptNameOverview
PageWithExcerptCCIDOC:_FC Reader Installation

Kit Installation Notes

Cci kits
TypeDescription

Multiexcerpt include
MultiExcerptNameF2 Install Header
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation

Installation Kit

Cci kits
TypeParts

Recommended Tools and Supplies (Not Included)

See F2 FasCard Reader Mounting Guide for more information.

Installation

Multiexcerpt include
MultiExcerptNamewarnings
DisableCachingtrue
PageWithExcerptCCIDOC:_LC Reader Installation

Div
Classinstall-steps
Panel

Step 1 - Install Mounting Bracket

Bw part list
PartsC-6700-Temp,C-6801
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.
  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.
  3. Refer to F2 FasCard Reader Mounting Guide for further instructions.
Panel

Step 2

- Connect Power

Bw part list
PartsC-5500-60,C-5101,C-5602,C-5210
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Tap power as described in the Fascard Reader Install

-

Universal Concepts document using the C-5101 Spade Taps provided.Connect the C-5210 Power Adapter Harness to the installed spade taps.

Connect

the opposite end to the C-5602 Power Converter.
  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
  • Panel
    Step 3 - Connect

    Machine Interface Harness

    Bw part list
    PartsC-01246124-MLVMDB
    SizingModeHeight
    ShowDesc2false
    ShowDesc3false
    SingleRowtrue

    1. Disconnect the Coin Drop from the Machine Control Assembly.
    2. Connect the C-01246124-MLV MDB Machine Interface Harness to the harness connected to the Coin Drop.
    3. Connect the remaining end of the C-01246124-MLV MDB Machine Interface Harness to the harness where the Coin Drop was previously connected.
    Panel

    Step

    4

    3 - Connect and Mount FasCard Reader

    Bw part list
    PartsC-5401,C-5500-60,C-01246124-MLVMDB
    SizingModeHeight
    ShowDesc2false
    ShowDesc3false
    SingleRowtrue

    1. Feed remaining harness ends through mounting hole as described in F2 FasCard Reader Mounting Guide.
    2. Connect the free end black, 10 pin connection of the C-01246124-MLV MDB Machine Start Interface Harness to port 2 (Pulse Serial Connection Port) as shown in the image below.
    3. Connect the free end clear, 3 pin connection of the C-55006124-60 MDB Power Extension Harness to port 1 (Power Connection Port) as shown in the image below.
    4. Connect FasCard reader to base as described in the F2 FasCard Reader Mounting Guide.
    5. Program the card reader address as described here: How to Program Address on a FasCard Reader.

    Multiexcerpt include
    MultiExcerptNameF2 Reader Ports
    PageWithExcerptCCIDOC:_FC Reader Installation

    Div
    HidePrinttrue

    Associated Equipment Models

    Cci kits
    TypeModels

    Multiexcerpt include
    MultiExcerptNameAdditional Info
    DisableCachingtrue
    PageWithExcerptCCIDOC:_FC Reader Installation