Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Automatic update to correct links
Div
Classtoc-header
Section
Column
width30
Panel
titleOn this Page

Table of Contents
maxLevel2
minLevel2

Column
width70
Panel
titleOverview and Equipment Information

Multiexcerpt include
MultiExcerptNameOverview
PageWithExcerptCCIDOC:_FC Reader Installation

Kit Installation Notes

Cci kits
TypeDescription

Multiexcerpt include
MultiExcerptNameF2 Install Header
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation

Installation Kit

Cci kits
TypeParts

Recommended Tools and Supplies (Not Included)

See F2 FasCard Reader Mounting Guide for more information.

Installation

Multiexcerpt include
MultiExcerptNamewarnings
DisableCachingtrue
PageWithExcerptCCIDOC:_LC Reader Installation


Div
Classinstall-steps
Panel

Step 1 - Install Mounting Bracket

Bw part list
PartsC-6936,C-6801,C-0144
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Run the C-5500 Power Adapter Harness and the C-5341 Machine Start Harness through the circular opening on the C-6936 Vault Mount Bracket.
  2. Spread the bracket wings to lock it into place once installed.
  3. Insert the C-6936 Vault Mount Bracket into the Coin Vault
  4. Run the C-5500 Power Adapter Harness and the C-5341 Machine Start Harness through the circular opening on the C-5414 F2 Mounting Bracket.
  5. Use the C-0144 screws, attach the C-5414 F2 Mounting Bracket to the C-6936 Vault Mount Bracket.
Panel

Step 2 - Connect Power

Bw part list
PartsC-5101,C-5336,C-5500,C-5602
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
  2. Connect the C-5336 Power Adapter Harness to the installed spade taps- Blue to Black and Brown to Red. Secure the green ground terminal under the bolt on top of the washer drum.
  3. Connect the opposite end of the C-5336 Power Adapter Harness to the C-5602 Power Converter.
  4. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
Panel

Step 3 - Connect Machine Start Harness

Bw part list
PartsC-5341
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Connect the C-5341 Machine Start Harness to the Terminal Strip in the same position that was previously connected to the Coin Drop.
    1. Wire orientation is not relevant.
Panel

Step 4 - Connect and Mount FasCard Reader

Bw part list
PartsC-6340,C-5341
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Multiexcerpt include
MultiExcerptNameF2 Reader Ports
PageWithExcerptCCIDOC:_FC Reader Installation

  1. Feed remaining harness ends through mounting hole as described in F2 FasCard Reader Mounting Guide.
  2. Connect the free end of the C-5341 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the C-5500 Power Extension Harness to port 1 (C-5500 Power Harness Connection Port) as shown above.
  4. Connect FasCard reader to base as described in the F2 FasCard Reader Mounting Guide.
  5. Program the card reader address as described here: How to Program Address on a FasCard Reader.
Div
HidePrinttrue

Associated Equipment Models

Cci kits
TypeModels