Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Automatic update to correct links
Div
Classtoc-header
Section
Column
width30
Panel
titleOn this Page

Table of Contents
maxLevel2
minLevel2

Column
width70
Panel
titleOverview and Equipment Information

Multiexcerpt include
MultiExcerptNameOverview
PageWithExcerptCCIDOC:_FC Reader Installation

Kit Installation Notes

Cci kits
TypeDescription

Multiexcerpt include
MultiExcerptNameF2 Install Header
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation

Installation Kit

Cci kits
TypeParts

Recommended Tools and Supplies (Not Included)

See LaundryCard Kit Installation Guidelines for more information.

Installation

Multiexcerpt include
MultiExcerptNamewarnings
DisableCachingtrue
PageWithExcerptCCIDOC:_LC Reader Installation

Div
Classinstall-steps
Panel

Step 1 - Remove Coin Drop

Bw part list
PartsC-0926,C-1044N
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Remove the existing Coin Drop.
    1. Refer to manufacturer documentation as needed.
  2. Install C-0926 Drop Cover over the cavity left by removing the Coin Drop.
Panel

Step 2 - Connect Machine Start Harness

Bw part list
PartsC-5344
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Connect the C-5344 Machine Start Harness to the control harness that was previously connected to the Coin Drop.
Panel

Step 3 - Install Mounting Bracket

Bw part list
PartsC-6925A,C-6925B,C-5751
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Install the C-6925A Mounting Bracket into the Coin Vault.
  2. Mount the C-0925B Mounting Bracket onto the matching Mounting Bracket using the C-5751 Screws.
Panel

Step 4 - Final Connections

Bw part list
PartsC-5344,C-5500-60
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Multiexcerpt include
MultiExcerptNameF2 Reader Ports
PageWithExcerptCCIDOC:_FC Reader Installation

  1. Feed remaining harness ends through mounting hole as described in FasCard Mounting Guide.
  2. Connect the free end of the C-5344 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the C-5500-60 Power Extension Harness to port 1 (C-5500 Power Harness Connection Port) as shown in the image above.
  4. Connect FasCard reader to base as described in the F2 FasCard Reader Mounting Guide.
  5. Program the card reader address as described here: How to Program Address on a FasCard Reader.
Div
HidePrinttrue

Associated Equipment Models

Cci kits
TypeModels


Multiexcerpt include
MultiExcerptNameAdditional Info
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation