Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Div
Classtoc-header
Section
Column
width30
Panel
titleOn this Page

Table of Contents
maxLevel2
minLevel2

Column
width70
Panel
titleOverview and Equipment Information

Multiexcerpt include
MultiExcerptNameOverview
PageWithExcerptCCIDOC:_FC Reader Installation

Kit Installation Notes

Cci kits
TypeDescription
This machine needs to be configured for Card Mode as described here: Enable Card Mode on Wascomat Crossover.

Multiexcerpt include
MultiExcerptNameInstall Header
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation

Installation Kit

Cci kits
TypeParts

Recommended Tools and Supplies (Not Included)

See FasCard Mounting Guide for more information.

Installation

Multiexcerpt include
MultiExcerptNamewarnings
DisableCachingtrue
PageWithExcerptCCIDOC:_LC Reader Installation

Div
Classinstall-steps
Panel

Step 1 - Install Mounting Bracket

Bw part list
PartsC-5752,C-1064,C-1042
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Image ModifiedImage Modified

  1. Install bracket provided with card ready machine.
    1. Pass cables through slot and connect before mounting reader using hardware provided.
Panel

Step 2 - Connect Power

Bw part list
PartsC-5350
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Image Modified

  1. Connect the C-5350 Power Harness to the mated power harness inside the machine.
  2. Secure the ground wire terminal beneath a chassis screw.
Panel

Step 3 - Connect Coin Sense Harness

Bw part list
PartsC-5352
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-5352 Coin Sense Harness to the harness connected to the Coin Drop.
Panel

Step 4 - Connect Machine Start Harness

Bw part list
PartsC-5355
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Image Modified

  1. Connect the C-5355 Machine Start Harness to the Machine Control Assembly ribbon cable.
Panel

Step 5 - Connect and Mount FasCard Reader

Bw part list
PartsC-5355,C-5352,C-5350
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Multiexcerpt include
MultiExcerptNameReader ports
PageWithExcerptCCIDOC:_FC Reader Installation

  1. Feed remaining harness ends through bracket slot.
  2. Connect the free end of the C-5355 Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
  3. Connect the free end of the C-5352 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5350 Power Harness to port 4 (C-5500 Power Harness Connection Port) as shown in the image above.
  5. Connect FasCard reader to base as described in the FasCard Mounting Guide.
  6. Program the card reader address as described here: How to Program Address on a FasCard Reader.
Div
HidePrinttrue

Associated Equipment Models

Cci kits
TypeModels

Multiexcerpt include
MultiExcerptNameAdditional Info
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation