Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Div
Classtoc-header
Section
Column
width30
Panel
titleOn this Page

Table of Contents
maxLevel2
minLevel2

Column
width70
Panel
titleOverview and Equipment Information

Multiexcerpt include
MultiExcerptNameOverview
PageWithExcerptCCIDOC:_FC Reader Installation

Kit Installation Notes

Cci kits
TypeDescription

Multiexcerpt include
MultiExcerptNameACA Dip Switches
PageWithExcerptCCIDOC:_FC Reader Installation

Multiexcerpt include
MultiExcerptNameInstall Header
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation

Installation Kit

Cci kits
TypeParts

Recommended Tools and Supplies (Not Included)

See FasCard F1 Reader Mounting Guide for more information.

Installation

Multiexcerpt include
MultiExcerptNamewarnings
DisableCachingtrue
PageWithExcerptCCIDOC:_LC Reader Installation

Div
Classinstall-steps
Panel

Step 1 - Install Mounting Bracket

Bw part list
PartsC-5761,C-0141,C-1059,C-1070-W
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Install the C-5765-W Mounting Bracket into the Metercase using the hardware provided.
Panel

Step 2 - Connect Power

Bw part list
PartsC-01225101,C-5210,C-5500,C-5501,C-5602
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-0122 5101 Spade Taps provided.
  2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
  3. Connect the C-5500 Power Extension Harness to the C-5501 Y Power Adapter Harness.
    1. Connect the opposite end to the C-5602 Power Converter.
  4. Connect the remaining connector of the C-5501 Y Power Adapter Harness and of the C-5500 Power Extension Harness to the installed FasCard Readers.
Panel

Step 3 - Connect Machine Start Harness

Bw part list
PartsC-5240
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

  1. Connect the C-5240 Machine Start Harness to the Machine Control Assembly.
Panel

Step 4 - Connect and Mount FasCard Reader

Bw part list
PartsC-5240,C-5500,C-5501
SizingModeHeight
ShowDesc2false
ShowDesc3false
SingleRowtrue

Multiexcerpt include
MultiExcerptNameReader ports
PageWithExcerptCCIDOC:_FC Reader Installation

  1. Feed remaining harness ends through mounting hole as described in FasCard F1 Reader Mounting Guide.
  2. Connect the free end of the C-5240 Machine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
  3. Connect the free end of the C-5500 Power Extension Harness or C-5501 Y Power Adapter Harness to port 4 (C-5500 Power Harness Connection Port) as shown in the image above.
  4. Connect FasCard reader to base as described in the FasCard Mounting Guide.
  5. Program the card reader address as described here: How to Program Address on a FasCard Reader.
Div
HidePrinttrue

Associated Equipment Models

Cci kits
TypeModels

Multiexcerpt include
MultiExcerptNameAdditional Info
DisableCachingtrue
PageWithExcerptCCIDOC:_FC Reader Installation