Kit Installation Notes

Installation Kit

Recommended Tools and Supplies (Not Included)

See FasCard Mounting Guide for more information.

Installation

Step 1 - Install Mounting Bracket

  1. Insert the C-0936 Vault Mount Bracket into the Coin Vault.
    1. Spread the bracket wings to lock it into place.
  2. Add the C-0133 Standoffs to the C-0936 Vault Mount Bracket.
  3. Place the C-0906 Spacer Plate over the vault opening before securing the FasCard Reader.
  4. Install the C-0963 Drop Cover over the cavity left by the Coin Drop.

Step 2 - Connect Power

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5338 Power Adapter Harness to the power distribution panel inside the machine.
    1. 120vac- Connect Brown and Blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.
    2. 240vac- Connect Brown and Blue wires to connectors #3 and #5 on the terminal side closest to the circuit board.
    3. Secure the green wire beneath the ground screw.
  2. Connect the opposite end of the C-5338 Power Adapter Harness to the C-5602 Power Converter.
  3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Step 3 - Connect Machine Start Harness

  1. Connect the C-0127 Machine Start Harness to the Machine Control Assembly where the coin drop was previously connected at P2.

Step 4 - Connect and Mount FasCard Reader

  1. Feed remaining harness ends through mounting bracket as described in FasCard Mounting Guide.
  2. Connect the free end of the C-0127 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the C-5500 Power Extension Harness to port 4 (C-5500 Power Harness Connection Port) as shown in the image above.
  4. Connect FasCard reader to bracket as described in the FasCard Mounting Guide.
  5. Program the card reader address as described here: How to Program Address on a FasCard Reader.

Associated Equipment Models