Kit Installation Notes

Installation Kit

Recommended Tools and Supplies (Not Included)

See F1 Reader Mounting Guide for more information.

Installation

Step 1 - Install Mounting Bracket

  1. Install the C-5765-W Mounting Bracket into the Coin Vault.

Step 2 - Connect Power

  1. Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.
  2. Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
  3. Connect one C-5500 Power Extension Harness to the C-5501 Y Power Adapter Harness.
    1. Connect the opposite end to the C-5602 Power Converter.
  4. Connect one C-5500 Power Extension Harnesses to the remaining connector on the C-5501 Y Power Adapter Harness.
    1. The remaining connector of the C-5501 Y Power Adapter Harness and of the C-5500 Power Extension Harness connect to the installed FasCard Readers.

Step 3 - Connect Machine Start Harness

  1. Connect the C-5300-NC Machine Start Harness to the Machine Control Assembly.

Step 4 - Connect and Mount FasCard Reader

  1. Feed remaining harness ends through mounting hole as described in FasCard Mounting Guide.
  2. Connect the free end of the C-5300-NC Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the C-5500 Power Extension Harness or C-5501 Y Power Adapter Harness to port 4 (C-5500 Power Harness Connection Port) as shown in the image above.
  4. Connect FasCard reader to base as described in the FasCard Mounting Guide.
  5. Program the card reader address as described here: How to Program Address on a FasCard Reader.

Associated Equipment Models